TRAXON 85W-140

Contains anti-wear and extreme pressure additives and is a higher viscosity grade for tough, high-load, high-operating temperature conditions for extended equipment life
Provides resistance to degradation and sludging

OEM Approvals
API

API GL-5 - Meets Specifications
API MT-1 - Meets Specifications

SAE

SAE J2360 global standard (formerly MIL-PRF-2105E) – PRI GL 0795 – Approved

Mack

Mack GO-J - Approved

Meritor

Meritor 0-76-A – Meets Specifications

Scania

Scania STO 1.0 (recommended for axles) - Meets Specifications

ZF

ZF TE-ML lubricant class 05A, 12M, 16D and 21A (ZF000778) – Approved

HYDRAULIC OIL AW46 5GAL BUCKET

• Premium anti-wear additives provide maximum protection to heavily-loaded surfaces helping to extend equipment life.
• Minimal viscosity change in both low and high temperature applications.
• Rapid water separation which helps minimize the effects of rust and corrosion.
• Fortified with anti-foaming agents to reduce air entrainment which also aids in water separation.
• Extended service life (5000 hour TOST, ISO 68) reduces unit maintenance costs.

AW HYDRAULIC FLUIDS are recommended for use in the following applications:

• Piston, vane and gear pumps.
• Industrial hydraulic systems and related components.
• Mobile equipment including cranes, excavators and mining implements.
• Industrial gear and bearing sets requiring rust and oxidation inhibited fluids.
• Marine applications where ISO HM category fluids are recommended.

ENVIROMENTAL AW46 HYDRAULIC OIL

Bio-Fleet™ Hydraulic Fluids are ultimately biodegradable1 vegetable based formulas that meets and exceeds Vickers M-2950-S, Vickers 1-286-5, U.S. Steel 126, and U.S. Steel 127. These patented biobased hydraulic fluids are formulated to perform in fleet, marine, and industrial hydraulic systems that require Anti-Wear (AW), anti-rust, antioxidation, anti-foam, and demulsibility properties. An environmentally friendly, zinc-free additive system has also been developed that meets or exceeds high pressure pump requirements. The anti-wear performance meets the requirements for Vickers 35VQ-25 and V-104C (ASTM D-2882) vane pump stand tests, and exceeds DIN 51524 Part 2 and 3 (HLP/HVLP) load stage 10 that is recommended for vane, piston and gear pumps.

ENVIROMENTAL BIO-FLEET AW68

Bio-Fleet™ Hydraulic Fluids are ultimately biodegradable1 vegetable based formulas that meets and exceeds Vickers M-2950-S, Vickers 1-286-5, U.S. Steel 126, and U.S. Steel 127. These patented biobased hydraulic fluids are formulated to perform in fleet, marine, and industrial hydraulic systems that require Anti-Wear (AW), anti-rust, antioxidation, anti-foam, and demulsibility properties. An environmentally friendly, zinc-free additive system has also been developed that meets or exceeds high pressure pump requirements. The anti-wear performance meets the requirements for Vickers 35VQ-25 and V-104C (ASTM D-2882) vane pump stand tests, and exceeds DIN 51524 Part 2 and 3 (HLP/HVLP) load stage 10 that is recommended for vane, piston and gear pumps.

DRYDENE TRANSALL® TRACTOR FLUID is recommended for use in most common hydraulic and transmission fluid applications for farm tractors and mobile off- road equipment:

• Tractor transmissions
• Tractor hydraulic systems
• Hydrostatic drive units
• Power take-off units
• Wet (oil immersed) brake systems
• Farm implement final-drive units

HYKEN® GLACIAL BLU HYDRAULIC FLUID

Applications
Industrial and mobile equipment operating in cold climates
Bucket trucks (cherry pickers) used for servicing electrical power lines or for tree-trimming
Surface mining equipment

Features & Benefits
Outstanding low-temperature properties
Very high viscosity index for use in arctic conditions
Good wear protection for hydraulic pumps and motors
Resists deposit formation and viscosity increase due to oxidation
Protects against rust and corrosion
Excellent water-separating properties
Good foam resistance
High dielectric strength for use in electrical service bucket trucks (cherry pickers)(1)